8 pcs Fuel Injectors for Ford GM V8 LT1 LS1 LS6 High Impedance Set 80LB/835CC

  • Product Code: FI-109991-8
  • Availability:
  • $88.00



 

Set of 8 80 lb. EV1 High Impedance(Approx. 12 OHMS) Fuel Injectors fit for:
1994-1995    for BMW 530i
1994-2003    for BMW 540i
1985-2002    for Chevrolet Camaro
1985-2004    for Chevrolet Corvette
1994-1996    for Chevrolet Impala
1986-1995    for Ford Mustang GT, LX and Cobra 5.0L
1996-2004    for Ford Mustang GT
1999-2004    for Ford Lightning
1996-2004    Lotus Esprit
1985-2002    for Pontiac Firebird
2004-2006    for Pontiac GTO
1985-2002    for Pontiac TransAm
The following models must change injector plugs
2010-2013    for Chevrolet Camaro 
2005-2013    for Chevrolet Corvette 
1999/2001    for Ford Mustang Cobra 
2003-2004    for Ford Mustang Cobra 
2003-2004    for Ford Mustang Mach I
2005-2013    for Ford Mustang V8 
The following models require spacers and longer fuel rail bolts and must change injector plugs
2005-2013    for Chrysler 300C HEMI 
2008-2012    for Dodge Challenger HEMI 
2006-2012    for Dodge Charger HEMI 
2005-2008    for Dodge for Magnum HEMI 
2006-2013    for Jeep Grand Cherokee SRT8

Quantity: One set of 8 fuel injectors
Cross references:  110324,109991,FI114992,FI114991,M-9593-LU80
Car make: for Chrysler, for GM, for BMW, for VW, for Audi, for Mitsubishi, etc
Design: GEN III EV1 style fuel injector
O-rings included: Yes, preinstalled
Injector Body design: Pencil & Metal & composite plastic
Orifice type: 1 hole
Connector: EV1
Filter design: Basket filter design at inlet
Fuel delivery: Single nozzle cone shape/single-hole disc, with filter. 
Spray pattern: 15 degree spray cone
Series: DEKA 4 ( DEKA IV )
O-ring type: Viton 

Techinical data
Dynamic flow rate : 18.6 for MG/for pulse 2.5ms PW, 20 ms Period
Coil resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Static flow rate: 80 lb/hr = 875 cc/min at  43.5PSI ( 300kPa )
Gain: 0.12ms/for MG
Offset: 0.055ms
Turn on time 1.14ms at 14VDC
Turn off time: 0.85ms at 600KPa
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Variance: 2 %
Overall length: 2 7/8 inches, 74 mm
O-ring to O-ring length: 2 1/2 inches, 63 mm
Diameter: 16 mm
O-rings: Top and bottom 14.5 mm
G.W.: 4lbs/1.5kg

Package Includes: 8 pcs Injectors (Same as picture show)
Warranty: 2 Years for manufacture defects
Notice: For whatever we can help,please feel free to contact us.

Write a review

Note: HTML is not translated!
    Bad           Good

Enter your destination to get a shipping estimate.


Related Products